How much does it cost to install vinyl soffit?

Vinyl soffits cost between $4 and $20 in 12-foot lengths, which means the average cost of vinyl soffits for a job totaling 1,200 square feet is $1,200 to $1,500. For a roof whose perimeter is 160 feet, the boards for the fascia would total about $100; the drip edge would come to $96.

Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed. Prices for the project depend on a number of factors, including the materials used and the size of your house.

Beside above, how much is labor for soffit? The labor cost to install fascia runs from $6 to $20 per linear foot but can vary greatly between companies and locations. A typical one-story home with 300 linear feet of soffits will require about 11 to 13 hours of labor running between $800 to $1,400 with an additional $120 to $150 in supply and equipment costs.

Also know, how much would it cost to install vinyl soffit?

Cost of Vinyl Soffit

Vinyl Soffit Costs Zip Code Lineal ft.
Basic Better
Installation Cost $125.00 – $135.00 $150.00 – $165.00
Total $315.00 – $345.00 $365.00 – $400.00
Vinyl Soffit – Total Average Cost per square foot $3.30 $3.83

Do you install soffit before siding?

Soffit is used to enclose the underside of an eave. The installation of soffit will determine the positioning of the inside and outside corner posts. It also is necessary to complete the soffit before the final course of siding is installed on the wall.

What is best material for soffit?

Vinyl is another popular soffit material that is highly durable and easy to maintain. Vinyl soffits are also available in textures and finishes that replicate the beauty of wood but without the maintenance. Vinyl soffits are also water resistant and great for high-moisture areas.

Do you need a drip edge with gutters?

If the home has no gutter, the drip edge will prevent the water from running down the fascia and onto or into the soffit cavity. Shingles, along with underlayments and ice and water protector, keep wind-driven rain from harming the roof’s deck. However, on the edges, the drip edge must compete with the wind.

What is the difference between soffit and fascia?

Typically a soffit is used in the area beneath the eaves on the exterior of a house to close the space beneath the eave. The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside.

What causes soffit damage?

Common problems that cause soffit and eave damage are: Structural flaws,such as improperly installed flashing or missing shingles. An improperly installed, damaged, or clogged gutter. Water being forced inward due to an ice dam. Animals, such as squirrels or birds, forcing their way into the eave space and nesting.

When should I replace my soffits and fascias?

The following are just a few of many signs that it’s time to hire an Upper Midwest roofing company to replace your soffits and fascia. 5 Signs That It’s Time to Replace Your Soffits and Fascia Cracks and Flaking Paint. Evidence of Pests. Suspected Asbestos. Water in Roof Void. Lack of Ventilation.

Are fascia boards necessary?

Fascia is meant to protect the roof and the interior of the home from moisture by blocking it from entry. It does have an aesthetic role as well; it creates an even appearance along the roof’s edge. If water gets behind the fascia board, it is vulnerable to damage.

Are soffits necessary?

Why does my home need soffit? Air from the soffit cycles to the vents to draw heat and moisture away from the house. Moisture is mold’s breading ground and the cause of roof rot and poor air quality. The soffit also helps keep pests from slipping into your home through the roofline or gutters and nesting in your attic.

How long is a piece of vinyl soffit?

Generally, soffits are between 0.35- and 0.55-inches thick and come in 12-foot-long sections that range from 6- to 16-inches wide. Installers then cut the pieces they need to the required lengths to fit under the eaves.

Is vinyl soffit better than aluminum?

Vinyl also has a higher impact resistance than aluminum which adds to its durability. When used under eaves, it helps to improve insulation. Less energy is utilized to heat and cool the house which brings down your energy costs with time. Vinyl soffit is low maintenance yet it keeps in good shape for a long time.

How much vinyl soffit do I need?

Multiply the total length by the width to obtain the area of soffit needed to fill the gap. For example, if the total eaves length is 110 feet, and the width is 2 feet, multiply 110 by 2. The result, 220 in this example, is the number of square feet of soffit required.

How many square feet are in a box of vinyl soffit?

Box Contents A box of vinyl siding contains two “squares.” A square in construction lingo equals 100 square feet, so a box of vinyl siding will cover 200 square feet. That’s only a starting point, however.

What size does soffit come in?

Soffits usually range from 16 to 24 inches wide. For instance, CertainTeed Ironmax soffits may span 24 inches without additional nailing strips, if permitted by code rules.