What does the refrigerator damper do?

The damper is a small flap that controls the flow of air from the freezer to the refrigerator. It is usually found in the top of the fridge or on the back panel near the top. The damper is controlled by a thermostat, which triggers it to open and close depending on the temperature of the air in the refrigerator.

The fresh food compartment in your Frigidaire refrigerator is actually cooled by the freezer compartment. The fresh food compartment has a damper installed at the top of the left wall, which allows air to pass from the freezer to the refrigerator compartment.

Subsequently, question is, how do you know if your refrigerator is cooling? Install a thermometer inside both the freezer and the refrigerator compartments to alert you of changes in the temperature.

  1. Not Running. Warm food or a defrosting freezer are the obvious signs a refrigerator is malfunctioning.
  2. Compressor. Pull your refrigerator away from the wall.
  3. Frost Buildup.
  4. Condenser.
  5. Considerations.

Also know, why is food freezing in my Frigidaire refrigerator?

Frigidaire Refrigerator freezing food. The temperature control thermostat directs voltage to the compressor, evaporator fan motor, and condenser fan motor (if applicable). If the temperature control thermostat is not working properly, it m As a result, the refrigerator will be too cold.

Where is the damper on my fridge?

The damper is a small flap that controls the flow of air from the freezer to the refrigerator. It is usually found in the top of the fridge or on the back panel near the top. The damper is controlled by a thermostat, which triggers it to open and close depending on the temperature of the air in the refrigerator.

Where are dampers located?

The dampers are usually located where the main duct connects with a round supply duct going to various areas of the house.

Where are the air vents on a refrigerator?

There are vents on the left side of the refrigerator that meet up with vents on the side of the icemaker casing on the door. The top vent supplies the icemaker compartment with cold air from the freezer when the door is closed. The icemaker area needs air flow, so the bottom vent is for return air.

Why is my fridge too warm?

The most common cause for this condition is a problem with the defrost system. If the refrigerator freezer is cold but the refrigerator is warm, the evaporator fan motor might have failed. Every refrigerator has a set of coils called an evaporator. The evaporator may be frosted up caused by a defrost problem.

What is a damper control?

A damper is a valve or plate that stops or regulates the flow of air inside a duct, chimney, VAV box, air handler, or other air-handling equipment. A damper may be used to cut off central air conditioning (heating or cooling) to an unused room, or to regulate it for room-by-room temperature and climate control.

Where is the temperature control on a Whirlpool refrigerator?

Temperature Controls One of the primary features of the control panel on the Whirlpool Gold refrigerator is the temperature control. Press and hold the “Temp” button for three seconds; this places the control panel into the adjustment mode.

What is damper control assembly?

Damper Control Assembly Specifications This part allows the cold air from the freezer section to be aired into the fresh food section and it is controlled by the thermostat.

Why is my fridge freezing food?

4 Reasons a REFRIGERATOR will FREEZE FOOD and items in it: 1 – The temperature for the refrigerator has been set TOO LOW or Set warmer. Most common reason. 2 – If the coils on your fridge are dirty or dusty, then the compressor needs to work harder and longer to keep the freezer temperature at freezing temperature.

How does refrigerator air diffuser work?

The Diffuser “Warmer” air from the refrigerator flows through the vents into the freezer, where it can be cooled by the refrigerant; colder air flows from the freezer into the refrigerator, where it lowers the temperature. The diffuser usually has a fan to help the exchange of air.

What number should my fridge be set at?

Get Fridge Setting Savvy The settings on the fridge temperature dial show refrigerant power. Normally the numbers range from one to five. Number one is the least cool setting and number five the coldest. When your fridge is always full you need to select a number four setting.

What should my fridge be set at?

Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C). Check temperatures periodically. Appliance thermometers are the best way of knowing these temperatures and are generally inexpensive.