Elastomeric roof coating is applied over your existing roof surface. If you don’t like white, elastometric roof coatings can be tinted to a wide variety of colors.
While elastomeric paint provides good coverage, you’ll quickly find it is more difficult to paint over. A dried elastomeric finish is very slick and doesn’t accept new paint as easily as a regular latex or oil painted surface. Fortunately, there are steps you can take to paint over EWC surfaces with quality results.
Subsequently, question is, can you tint roof paint? Roof coatings are fundamentally different from paint products, and it is not recommended that you tint them in the field after the original purchase. While white is the preferred color for optimal reflectivity, some roof coating manufacturers offer standard color options for the customer.
Also to know, can you tint elastomeric paint?
Elastomeric paint colors are almost alwasy available in white and can be tinted to your desired color.
Does Kool Seal come in colors?
Kool Seal Premium Roof Paint. Kool Seal® Premium Roof Paint is a 100% acrylic coating that is tintable to a wide range of colors. This decorative coating resists fading and the dry coating of this paint is mildew resistant.
How long do Elastomeric roof coatings last?
The traditional model was to tear off the aging roof and replace it after 15 or 20 years. “Elastomeric coatings could last the lifetime of the building with regular maintenance,” Dow says. Maintenance is limited to occasional cleaning with a hose or power washer and reapplying the coating every 10 or 15 years.
What is the best elastomeric roof coating?
There are 4 main types of Elastomeric roof Coatings namely; Butyl, Acrylic, Polyurethane and Silicone. Butyl. This type of elastomeric roof coating is the best for flat roof repair, low-sloping roofs i.e. single-ply or built-up PVC. Acrylic. Acrylic roof coating is the best for over sloped roofs. Polyurethane. Silicone.
How much does elastomeric coating cost?
Pricing for elastomeric coatings can range between $1.35 to $1.80 per square foot. This includes labor.
Is elastomeric roof coating waterproof?
Lanco White-Seal is a 1-component, high performance rubberized, elastomeric roof sealer. When applied as directed, it will provide a waterproof and weatherproof seal and will not crack, crumble or peel despite exposure to severe weather or total joint movement.
How do you remove elastomeric roof coating?
Pressure wash all the stubborn areas that don’t readily peel. Strip elastomeric paint with a chemical remover. You can choose among several types to brush on and dissolve the elastomeric coating. Once you dissolve the coating, you can pressure wash it off or peel it away.
Is elastomeric paint waterproof?
Elastomeric coating is an above-grade exterior wall or roof coating that is approximately 10 times thicker than paint. It forms an incredibly thick yet flexible coating that helps waterproof the exterior of a structure. Elastomeric coatings can be used on walls as well as roofs.
Do elastomeric roof coatings work?
With acrylics typically being thinner than silicones, this is an easy myth to believe. Fact: Elastomeric roof coatings are strong and flexible enough to be one of the most durable roof coatings available today. Myth #2: Elastomeric roof coatings perform as well as silicone roof coatings when it comes to ponding.
Is elastomeric paint good for wood?
Elastomeric paint can adhere to almost every surface. It can be applied to all masonry surfaces, particularly stucco and concrete block, but is also equally sustainable for wood and T-111 siding.
How do you apply elastomeric coating?
Application of an Elastomeric Roof Coating: Apply a base coat of AcryShield by spray or roller across the roof field (see below for rate/gallon per 100 square feet based on roofing substrate) Allow 8-24 hours for coating to thoroughly dry.
Does elastomeric paint need primer?
Elastomeric paint forms a durable, tough film that provides a waterproof coating to almost any structure. These imperfections must be completely filled with primer and paint or water will penetrate beneath the finish and cause peeling.
Is elastomeric paint breathable?
A “breathable” coating is generally considered one that is 10 perms or greater, and typical elastomeric coatings may range from 8-12 perms or more. ‘ Water vapor that can no longer be breathed out of the wall gathers behind the coating and condenses into water.
Should I use elastomeric paint?
Advantages to Elastomeric: Protects from wind driven rain – Strong wind driven rain can harm paint coatings. Elastomeric paint is designed to withstand this more so than typical house paints. Bridges hairline cracks – Often stucco will begin to crack. Elastomeric paint will fill these hairline cracks.
How thick is elastomeric paint?
Elastomeric coatings are higher volume solids (45-60%) than conventional paints, and are applied in films that typically attain a dry film thickness in the range of 10-20 mils per coat (versus conventional paints with a DFT of 2-3 mils).
Should I use elastomeric paint on stucco?
?An elastomeric paint can also be used on stucco walls but has a much lower permeability rating and does not allow the wall to breathe as easily. An elastomeric product does have the ability to bridge small cracks, which makes it a better choice for some people with a lot of cracks.