# How many yards of pea gravel are in a ton?

Multiply your cubic yards by 1.3 to find the total number of tons you’ll need. (A single cubic yard of pea gravel weighs about 1.3 short tons.)

The general range for a cubic yard of plain pea gravel is about \$30 to \$35, and a ton will cost about \$40 to \$45. For a colored variety, expect to add an extra \$20 to \$50 to those prices. If you buy in bulk, or 10 or more tons at a time, you may be able to get the price down to as low as \$15 to \$20 per ton.

Also Know, how many yards are in a ton of gravel? A general rule of thumb when converting cubic yards of gravel to tons is to multiply the cubic area by 1.4. For your reference, gravel typically weighs 2,800 pounds per cubic yard. In addition, there are 2,000 pounds to a ton. For instance, if your area to be landscaped is 100 cubic yards, multiply that by 1.4.

Beside this, how many cubic yards are in a ton of pea gravel?

Calculate 1B Pea Gravel

Coverage (Square feet) 400 sq ft
Volume (Cubic feet) 67 cu ft
Volume (Cubic yards) 2.5 cu yd
Estimated amount (Pounds) 5,951 lb
Estimated amount (Tons) 2.98 ton

How do I calculate how much pea gravel I need?

If the area to be covered is a square or rectangle, you easily can calculate the amount of pea gravel needed by hand. Measure the length, width and depth in feet of the area to be covered. Multiply the three numbers together. Divide by 27 to get the number of cubic yards of pea gravel needed.

### Does pea gravel need to be compacted?

Using Pea Gravel as Flexible Pipe Backfill. Unfortunately, other “pea gravels” contain rounded particles of a single size, such as a washed river stone. Such fill material is difficult to compact and to place without adequate confinement to keep it from spreading.

### How much does 1/2 yard gravel weigh?

Multiply the weight of the gravel, in this case 105 pounds, by 27 to determine cubic yards because there are 27 cubic feet in 1 cubic yard. The result is 2,835 pounds per cubic yard of gravel.

### Can you walk barefoot on pea gravel?

Pea gravel used for a walkway provides a softer surface to walk on compared with using a larger type of gravel. Walking on pea gravel barefoot is more bearable than walking on larger rocks which some times have jagged edges that can stab at feet.

### How much is a dump truck load of gravel?

The cost of gravel ranges from \$10 to \$50 per ton, \$15 to \$75 per yard, \$1 to \$3 per square foot, or \$1,350 per truck load depending on the rock type, volume, and travel distance.

### Is pea gravel cheaper than concrete?

Pea gravel is cheaper than a majority of other fillers, like concrete and other larger stones. Its cost ranges from around USD 35 to USD 55 per cubic yard. Also, it can be compacted better than the large-sized fillers.

### How deep does pea gravel need to be?

Pea Gravel Patio Depth Similar to pea gravel walkways, most pea gravel patios are constructed to offer a depth of about two inches, though you may need to dig deeper if the underlying soil isn’t firm enough to provide an effective foundation.

### How much is a ton weigh?

Ton, unit of weight in the avoirdupois system equal to 2,000 pounds (907.18 kg) in the United States (the short ton) and 2,240 pounds (1,016.05 kg) in Britain (the long ton). The metric ton used in most other countries is 1,000 kg, equivalent to 2,204.6 pounds avoirdupois.

### How much will a ton of gravel cover?

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

### How much does a 1/2 cubic foot of pea gravel weigh?

Multiply your cubic feet by 96 to find the total number of pounds you’ll need. (A single cubic foot of pea gravel weighs about 96 pounds.)

2800 lbs

788 kg

### How many tons are in a cubic yard?

A cubic yard is equal to 27 cubic feet. You can use the online calculator to determine how many cubic yards of material are required. As a general guide, 1 cubic yard of aggregate, sand, or dirt is equivalent to 1.5 tons.

100 square feet

70 pounds