Where is the anode rod in a Bradford White water heater?

The anode rod in your Bradford White water heater is located at the hot water outlet of your tank. Unfortunately, it is not easily accessible. You must remove the hot water outlet to access it.

The anode rod will be located on the top side of the unit. In some cases, it may be directly connected to the hot water outlet line on top of the heater. If you have the user manual for the water heater, it will include a diagram which shows where the anode rod is located, otherwise consult the manufacturer’s website.

how much does an anode rod cost? If a tank lasts ten years and costs $800 to install, that’s $80 per year. Most tanks come with one anode, which, in most waters will last four years before needing replacement. Say you do charge $100 to replace the rod.

do I need an anode rod in my water heater?

The reason an Anode Rod is required by a Suburban Water Heater is because the tank of the Suburban Water Heater uses glass enamel over a steel tank. If the enamel cracks for any reason it will expose the steel to the water and the steel will start to corrode even from a pinhole in the enamel.

What anode rod do I need?

Aluminum anode rods are best for places with hard water. The aluminum rod will withstand harder water better than a magnesium or zinc rod. Zinc anode rods are designed to eliminate or reduce the sulphur or rotten egg smell present. A Zinc anode rod made from a combination of aluminum and zinc.

Which is better aluminum or magnesium anode rod?

For harder water an aluminum anode rod is the best choice for your heater and if you live in an area with soft water then a magnesium anode rod is your best choice. Aluminum anodes tend to be cheaper than magnesium anode rods. A magnesium rod will generally last less than an aluminum rod.

Do Bradford White Water Heaters have anode rods?

The anode rod in your Bradford White water heater is located at the hot water outlet of your tank. Unfortunately, it is not easily accessible. If you don’t want to have to check your anode in your bradford white water heater every year, you can install a Corro-Protec powered anode.

When should anode rods be replaced?

When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every five years, you can double the life of your water heater.

Are anode rods universal?

They’re impossible to find. Now that I’ve found you sell them, are anode rods universal? A: An anode rod is aluminum or magnesium cast around a steel core wire and hex head. For residential-type heaters, all anodes are the same diameter — 3/4-inch.

Are Bradford White Water Heaters glass lined?

Vitraglas This produces a superior, durable, corrosion-resistant, and long-lasting lining. Bradford White created Vitraglas ™ and effectively set the standard for glass-lining protection. Vitraglas ™is one of many important innovations from Bradford White and another reason Bradford White is “Built to be the Best.”

Can anode rod causing rotten egg smell?

If the anode rod isn’t corroded, the hot water’s sulfur smell could be due to sulfur bacteria growth. Sulfur bacteria occurs naturally in the water supply and can breed in the water heater, causing an increase in hydrogen sulfide gas.

Can you remove the anode rod from water heater?

If the water heater anode is removed, it will greatly reduce the life of the heater. You can replace everything on a water heater except the tank.

Why does my water heater smell like rotten eggs?

The most common cause of smelly water is anaerobic bacteria that exist in some water and react with sulfur and the magnesium and aluminum sacrificial anodes that come with most water heaters to produce hydrogen sulfide gas, making the classic rotten egg odor. Softening can make smelly water much worse.

Can you clean an anode rod?

Can You Clean an Anode Rod? You cannot clean your anode rod in your water heater . However, it is important to inspect the sacrificial anode rod every 1 to 3 years and replace it after more than 50% of its wear and tear to avoid corrosion of your tank.

What is the best anode rod for a water heater?

Aluminum. Aluminum and aluminum/zinc anode rods are used in similar ways as magnesium sacrificial rods. However, aluminum rods are the better choice for a water heater that heats up sulfate-tinged water. Sacrificial anodes change sulfates into hydrogen sulfides.