Autozone and Advance Auto Parts stores accept used motor oil, transmission fluid, gear oil and automotive batteries. Autozone also collects and recycles 13,000 tons of scrap metal per year (brake rotors, pads, water pumps, radiators, etc.).
If you’re just looking to clear some space out of your garage, you can take your brake rotors to your local garbage transfer station or recycling center. Locate your nearest garbage transfer station or recycling center. You can check with your city or town hall for more information on where one of these is located.
Also, does AutoZone recycle brake fluid? Used fluids such as engine oil, transmission fluid, antifreeze and brake fluid are hazardous wastes and must be disposed of properly. A number of service stations and auto parts stores are also accepting waste fluids for recycling.
Just so, can you scrap car rotors?
If you are looking to scrap some of your auto parts like brake rotors, you can bring them to Rockaway Recycling. Brake rotors are large steel discs that you can find on any vehicle. They are often quite heavy (15-30 lbs. each) and if you have a larger quantity of them, it can be worth it to recycle.
Where do I dispose of auto parts?
Disposing of car parts If it’s large and made of metal — such as an engine block, door, fender, or muffler — find a local metal scrapyard that will take it. Some auto parts stores accept and recycle large metal parts, too. Most places that sell new car batteries will take your old battery after you’ve swapped them.
How do you dispose of brake rotors?
How to Recycle Brake Rotors Find a scrap metal dealer in your area. If you’re not sure where to find one, check with your city or county waste management office to find out which scrap metal dealers they recommend. Weigh your rotors to determine how much scrap metal you have. Take your brake rotors to the scrap metal dealer of your choice.
What should I do with old rotors and brake pads?
If there is a free scrap metal drop near buy, toss them in the bin. Just toss it in the recycling bin if you don’t want to leave it on the curb. Brake pads can go in the bin too.
How much can I get for old rotors?
Scrap them. Round here right now it’s $14 per 100lbs. Metal collectors come by the shop and offer a buck a rotor, so you KNOW they’re worth at least $1 each in scrap.
Can you scrap brake pads?
Recycling brake pads and shoes that DO NOT contain asbestos – All metal parts associated with brakes, including brake shoes, brake pads and metal shavings should be recycled with other scrap metals (go to METAL (ALUMINUM, BRASS, COPPER, IRON, LEAD, STEEL, TIN in RECYCLING A-Z).
Can you weld brake rotor?
Most brake rotors and drums are iron not steel. You CAN weld to them but need the correct welding rod or wire plus sometimes preheat and post-weld treatment.
Can you use used rotors?
In the old days a technician could easily resurface a brake rotor twice. Brake rotors can look perfectly fine to the naked eye, making you think you can reuse brake rotors. But looks are irrelevant—brake rotors must be measured with a brake micrometer to determine whether they can be reused or resurfaced.
What are brake rotors made of?
The disc is usually made of cast iron, but may in some cases be made of composites such as reinforced carbon–carbon or ceramic matrix composites. This is connected to the wheel and/or the axle.
What is scrap metal selling for today?
Scrap Metal Prices *See disclaimer for additional costs* Non-Ferrous Scrap Metal Market Price Your Price * Scrap Batteries $0.30 lb. $0.23 lb. Scrap Aluminum Siding $0.45 lb. $0.38 lb. Scrap New Cast Aluminum $0.40 lb $0.30 lb Scrap Old Cast Aluminum $0.34 lb $0.30 lb
What kind of metal is rotors?
Cast Iron In fact, it’s the most common material for brake rotors. The right design (usually two-piece) can even work well in a performance vehicle.
How much does an average brake rotor weigh?
A typical front disc rotor on a large sedan is approximately 300mm (12in) in diameter and weighs around 9.5kg (21 lbs). We’ll focus on the front disc as it generally takes 70% of the braking load.
Why are rotors made of cast iron?
The two most common materials used in brake rotors are cast iron and carbon fiber. Grey cast iron contains carbon flakes which produces the most effective noise dampening properties of all irons and steel. It also enables high thermal conductivity properties making it the first choice for braking.
Do brake rotors have a core charge?
A core charge is a deposit charged in addition to the price of the replacement caliper that is refunded when you return the old caliper and its hardware to the parts store. OE calipers can cost twice that or more. A typical core charge is about $50.
How do you dispose of brake fluid?
To dispose of new or unused brake fluid, pour it into a container of cat litter. The brake fluid will evaporate within a few days. As with paint, keep this away from pets and children, and any source of ignition.