How much does it cost to replace an axle shaft?

The average cost for an axle shaft replacement is between $1,304 and $1,679. Labor costs are estimated between $151 and $191 while parts are priced between $1153 and $1488. Estimate does not include taxes and fees.

The repairs can cost you anywhere from $170 to $900 or more. It depends primarily on the kind of car you have, as the parts will range in price quite a bit. Labor costs are typically between $100 and $200, but a few cars will cost more. It just depends on how long the mechanic has to work to change out your axle.

One may also ask, what are signs of a bad axle? 3 Symptoms of a Bad Drive Axle

  • Noise. A clicking noise when driving, especially when cornering or backing with wheels steered sharply, is typical of a drive axle that needs to be replaced.
  • Vibration. Vibration in the wheel when driving is another symptom of a bad drive axle.
  • Movement.

Subsequently, one may also ask, how long does it take to replace an axle?

Choose your car for a more accurate estimate On the 2006 Navigator, if a professional mechanic is replacing the axle(s), it is assumed to take about 1 hour to replace one axle (i.e., one side) whether it is the rear axle or the front axle.

Can you drive a car with a broken axle?

If one of your axles is broken, do not drive the car. It’s not safe. If you notice a bumping, clicking or grinding noise when going into turns, your axle isn’t broken yet, but it’s only a matter of time. If your axles are failing, you‘ll still technically be able to drive your car.

What does a bad front axle sound like?

One of the most common and most noticeable symptoms of a bad or failing CV axle shaft assembly is an audible clicking noise when turning. The clicks may become louder or more pronounced during sharper and faster turns, and will be heard on the side with the faulty CV shaft.

How long do front axles last?

The good news is that CV axles in most cars are covered by the powertrain warranty, which is typically 5 years or 60,000 miles. Check your warranty brochure for details. How long do CV axles last? In many cars, if the protective boots are not broken, CV axles can last for the lifetime of the car.

What happens if you don’t fix your CV axle?

CV joint failure: In a worst case scenario, your CV joint will fail. Essentially, this will break the axle, leaving you with a car that won’t go anywhere. If this happens while you’re driving, it can be serious, leading to a total loss of control.

What causes front axle to break?

The main purpose of axles is to transfer power from the transmission to the wheels. Even though axles are built to be tough, an overloaded vehicle can sometimes crack or break an axle. Bad carrier bearings or bad potholes are other common causes of axle problems.

Can car axle be repaired?

In most cases a bent axle cannot be repaired and must be replaced. A bad axle will lead to other damage to your vehicle down the line. So it’s critical that the axle be in great condition to avoid other costly repairs.

Can a front axle be fixed?

It depends on the car. It should be technically possible to replace a front axle – its not an impossible repair, but it could be an expensive one that insurance wont pay for. It could be a costly and complicated repair, or it might be possible to replace only a few parts of the axle that are actually broken.

Does a bent axle total a car?

If the crash results in a broken axle, dented or tweaked pillar (the parts that “hold up” the roof, including the front windshield frame, the part between your front and rear doors, and the rear roofline), or extensive damage to the drivetrain or under-hood components, you could be looking at a total loss.

Are CV joints hard to replace?

CV Joint and/or Wheel Bearings are probably damaged if you are hearing clicking. Easy to replace if you have the skills/tools/time. It is always easier to replace the half shaft (usually a refurb with a rebuild CV Joint and new boot) then it is to replace the CV joint components. If you do most of your own work.

Is a CV joint and axle the same thing?

A CV axle has two CV joints (an inner joint and an outer joint). These joints allow the axle to transfer the engine’s power to the drive wheels at a constant speed while accommodating for the different travel conditions, including the up and down motion of the suspension and cornering.

Why would an axle need to be replaced?

The transmission works to rotate the axle shafts, which in turn causes the wheels to rotate. If the grease leaks out of the boots, the joints lose lubrication, dirt gets in, and the axle can wear out. Signs that your axle / CV shaft assembly may need to be replaced include: Grease around the tires.

Can a bad CV axle damage transmission?

yes a bad axle can cause your transmission to go bad. it can cause transmission leaks due to a damaged seal if you grab the axle closest to the inner joint near the transmission and you can move it up and down that is a sign the differential in the transmission is worn.

Should you replace both CV axles at the same time?

CV joints and boots can be replaced individually, but most professional technicians and even do-it-yourselfers prefer to replace the whole halfshaft assembly with a remanufactured shaft. On a high-mileage vehicle with a bad CV joint or boot, it’s often a good idea to replace both shafts at the same time.