How do I remove the drain stopper from my Kohler bathtub?

How do you get them off? Lift the stopper part way up (all the way up and it spins around freely; part way up and it will not turn, providing the “resistance” for you to screw against) and then turn it counter-clockwise. This will unscrew the stopper from the rod that connects it to the drain.

Removing the Stopper

  1. The ball rod holds the stopper in the drain. To reach the stopper, the ball rod needs to be removed first.
  2. The ball rod is inserted into the side of the drain and attached with a nut.
  3. To remove, unthread the rod nut, pull the ball rod out, and remove the stopper from the drain.

Also Know, how do you remove a Kohler lift and turn drain stopper? Lift the stopper part way up (all the way up and it spins around freely; part way up and it will not turn, providing the “resistance” for you to screw against) and then turn it counter-clockwise. This will unscrew the stopper from the rod that connects it to the drain.

Moreover, how do you remove a tub lift and turn stopper?

Lift and Turn Tub Stopper With the stopper in the open position, use one hand to hold the body of the stopper in place. Slowing turn the knob counter-clockwise, looking for a screw set on the knob. If there isn’t one, turn the stopper counter-clockwise to unthread from the strainer until it can be removed.

How do you fix a Kohler drain stopper?

How to Fix a Kohler Sink Stopper

  1. Push the stopper handle all the way down to expose the bottom of the stopper linkage underneath the sink.
  2. Locate the tension clip that secures the clevis to the stopper linkage.
  3. Disconnect the clevis from the stopper linkage.
  4. Remove the clevis from the sink’s drainpipe.
  5. Lift the stopper out of the sink.

How do you remove a bathtub drain flange?

If you’re removing the entire drain apparatus, including the basket (also known as the flange), insert your drain key or smart dumbbell into the opening. Turn it counterclockwise and continue turning until the drain flange is released, then remove the flange while it’s still attached to the drain key.

How do you replace a lift and turn tub stopper?

How to Replace a Lift & Turn Bathtub Drain Grab the knob on top of the drain plug. Remove the brass insert by rotating it counterclockwise with a flat-head screwdriver. Insert the ends of tongue-and-groove plier handles into the opening in the bottom of the drain body.

How do you remove a twist and pull drain?

Twist-and-Pull Drain Stoppers Open Stopper. Open the drain stopper by pulling up on the knob and turning until the stopper is in the open position. Loosen Set-Screw From Stopper. Unscrew Mounting Post. Inspect Rubber Seals. Remove Soap Scum and Hair. Scrub Mounting Post and Stopper Body. Polish Surfaces. Reattach Mounting Post.

How do you remove a pop up drain stopper?

Pop-up stopper Pop-up stoppers are the kind where you push it down to close it – and then push it once more to make it pop up again when you want to open it. To remove one, set it to the open position and turn the stopper in a counterclockwise direction to unscrew it. Next, unscrew the shaft.

How does a lift and turn drain work?

A lift-and-turn drain stopper is identified by a small knob on the cap of the drain stopper, which is used to twist the stopper open and closed. A lift-and-turn stopper is closed by turning the knob on the top of the stopper until it goes down, and it is opened by lifting and turning the knob in the opposite direction.

How do I remove the plug from my bathtub?

Remove the knob on the top of the stopper. Hold the body of the stopper in place with one hand and with the other hand unscrew the knob by turning it counter-clockwise. If the knob will not unscrew, then wrap the rag around the knob and use the pliers to help remove the knob.